Half Wrap or Extra Wrap

The HALF WRAP is about 600mm x370mm and the top tube and fork legs are pre cut. So it makes install on a road bike much easier and quicker. The EXTRA WRAP is about 600x 600mm and you can use the templates on the back of the sheet to cut it yourself. I’d suggest this for MTB or where extra material is needed.

Not including the S-Works this was a HALF WRAP

The Vias used an EXTRA WRAP, I used the extra for the back stays

The Half wrap only covers the top, visible part of the tube and the visible parts of the tube legs. Whereas the full wrap would go all the way around the tube/fork.

HALF WRAP

EXTRA WRAP

Notice how the extra wrap goes all the way around the tube/fork.